IRCommand2 3.91 Description:

IRCommand2 is IR (infrared) and X10 remote control software for the PC that enables you to control virtually any device that has a remote control. You can create device "panels", each of which can represent one of your devices or a virtual device. Then add command buttons to a device panel by dragging re-sizable buttons from the button kit. Train the new command buttons using a remote control, or program them with macro sequences.

IRCommand2 can also listen for and respond to IR and X10 commands from remote controls. Simply program a "trigger" into a command button using a remote control and that command button will then execute whenever IRCommand2 receives that trigger. X10 triggers can wake the PC from standby.

IRCommand2 is expandable via its COM interface. This interface allows external programs, including VB and VBA, to link to command buttons you have created in order to control devices.

IRCommand2 currently works with the Actisys IR200L, Tira2, MyBlaster, and USB-UIRT IR control heads and the CM11A/HD11A interface for X10 control. Written in C , IRCommand2 is efficient, does not put a strain on your PC's resources, and works well with most other programs. If you currently own any of the supported hardware then you should definitely check out this software. If not, the download documentation tells you where you can get the relatively inexpensive hardware. In addition, this software will run without hardware thus allowing you to evaluate the user interface features.

IRCommand2 3.91 Features:

· Can control almost any device that uses an IR (infrared) remote or X10 controller
· Macro capabilities allow definition of complex command sequences including macro support for time delays
· Time triggers allow execution of commands on a specific weekly time schedule. Triggers execute on schedule even if your PC is in a standby state
· Can perform actions in response to received IR and X10 triggers that you define
· Button layouts are completely user defined
· Uses small and relatively inexpensive IR and X10 hardware that connects to a serial or USB port on your PC.

IRCommand2 3.91 Limitations:

· 60 days trial period
· 1 Maximum Device Panels Allowed
· 10 Maximum Buttons Allowed
· 1 Maximum Dongles Allowed

Related searches:

dvr remote software

IRCommand2 security information

You cannot download any crack or serial number for IRCommand2 on this page. Every software that you are able to download on our site is legal. There is no crack, serial number, hack or activation key for IRCommand2 present here. Our collection also doesn't contain any keygens, because keygen programs are being used in illegal ways which we do not support. All software that you can find here is freely downloadable and legal.

IRCommand2 installation package is prepared to be downloaded from our fast download servers. It is checked for possible viruses and is proven to be 100% clean and safe. Various leading antiviruses have been used to test IRCommand2, if it contains any viruses. No infections have been found and downloading IRCommand2 is completelly problem free because of that reason. Our experts on malware detection tested IRCommand2 with various spyware and malware detection programs, including fyxm.net custom malware and spyware detection, and absolutelly no malware or spyware was found in IRCommand2.

All software that you can find on our servers, including IRCommand2, is either freeware, shareware or open-source, some of the software packages are demo, trial or patch versions and if possible (public domain licence), we also host official full versions of software.

Because we want to be one of the fastest download sites on the web, we host all the software including IRCommand2 on our servers. You cannot find here any torrents or download links that would lead you to dangerous sites.

Fyxm.net does support free software, however we do not support warez or illegal downloads. Warez is harming producers of the software.

Enjoy!