RAID Reconstructor 4.01 Description:

RAID Reconstructor will help you recover data from a corrupted  RAID Level 5 or RAID Level 0 Array.

Even if you do not know the RAID parameters, such as drive order and block size, RAID Reconstructor will analyze your drives and determine the correct values. You will then be able to create a copy of the reconstructed RAID in an image file or on a physical drive..

Runtime's RAID Reconstructor will help you to recover data from broken
· RAID Level 5 Array consisting of 3 to 14 drives
· RAIRAID Level 0 Array (Striping) consisting of 2 to 14 drives

Even if you do not know the RAID parameters, such as drive order, block size and direction of rotation, RAID Reconstructor will analyze your drives and determine the correct values. You will then be able to create a copy of the reconstructed RAID in an image file or on a physical drive

RAID Reconstructor is Read-Only
It will not try to "fix" your RAID. It will merely create a copy of your RAID at another location. It will collect sector by sector from each single drive involved and write these sectors in the correct order to the designated destination. This process is also called "de-striping".

Because one drive is redundant in RAID 5, it is sufficient to have one less than the original number of drives (N) in the array. RAID Reconstructor can recalculate the original data from the N-1 drives. For a RAID-0 (striped) array you will need both drives.

The RAID Reconstructor will recover both, hardware and software RAIDs. It will recover from broken Windows Dynamic Disk sets.

RAID Reconstructor 4.01 Requirements:

· Pentium processor
· 32-128 MB RAM
· One problem-free hard disk to boot from
· Disk controller card capable of handling all the drives in your RAID individually
· Storage space for holding the reconstructed RAID

RAID Reconstructor 4.01 Limitations:

· Registering the software will enable you to copy the RAID to a virtual image, a file image or physical drive.
· 30 days trial period

Related searches:

array

RAID Reconstructor security information

You cannot download any crack or serial number for RAID Reconstructor on this page. Every software that you are able to download on our site is legal. There is no crack, serial number, hack or activation key for RAID Reconstructor present here. Our collection also doesn't contain any keygens, because keygen programs are being used in illegal ways which we do not support. All software that you can find here is freely downloadable and legal.

RAID Reconstructor installation package is prepared to be downloaded from our fast download servers. It is checked for possible viruses and is proven to be 100% clean and safe. Various leading antiviruses have been used to test RAID Reconstructor, if it contains any viruses. No infections have been found and downloading RAID Reconstructor is completelly problem free because of that reason. Our experts on malware detection tested RAID Reconstructor with various spyware and malware detection programs, including fyxm.net custom malware and spyware detection, and absolutelly no malware or spyware was found in RAID Reconstructor.

All software that you can find on our servers, including RAID Reconstructor, is either freeware, shareware or open-source, some of the software packages are demo, trial or patch versions and if possible (public domain licence), we also host official full versions of software.

Because we want to be one of the fastest download sites on the web, we host all the software including RAID Reconstructor on our servers. You cannot find here any torrents or download links that would lead you to dangerous sites.

Fyxm.net does support free software, however we do not support warez or illegal downloads. Warez is harming producers of the software.

Enjoy!