RoMac CW Identifier & Tuning Pulser 2.4.4 Download

fyxm network: our download portal -
RoMac CW Identifier & Tuning Pulser
        Bookmark and Share
  • Name:RoMac CW Identifier & Tuning Pulser
  • License:Trial
  • Developer:RoMacSoftware
  • Downloads:83
  • Rating:2 / 5
  • OS:Windows 2K / XP / 2003 / Vista
  • Size:4.8 MB
  • D.M.C.A. 
  • Download > 

RoMac CW Identifier & Tuning Pulser 2.4.4

RoMac CW Identifier & Tuning Pulser 2.4.4 Description:

RoMac CW Identifier & Tuning Pulser utilizes your present computer's sound card to automatically send your callsign at preset intervals, to insure your stations compliance with FCC regulations.  Also incorporated is a Tuning Pulser aka Pecker, to aid in reducing stress and heat while tuning your amplifier, antenna tuner, etc. Owners of the old Pulser software may use their old license for the new combined Automatic CW Identifier and Pulser software.

The program will run in the windows tray so it will not take up valuable screen real estate.  also available is an option to display a small time to ID clock anywhere on the screen you want.

Select whether to send the CW Id either at the beginning of a transmission or at the end .

You can make sure your station is properly identified while tuning up. You have the option to send the CW Id at the end tuning with the Pulser. No more forgetting to ID properly!

No more programming EPROM's to change callsigns. Just type in your new callsign and you're ready to go. Great for that new vanity call you want in the future.

CW speed speed is fully adjustable from 5 to 40 wpm, ID time interval ranges from 1 to 30 minutes in one second increments, and the tone of the CW note is adjustable from 500 Hz to 1000 Hz.

Choose from three convenient options of when to send you station identification, to ensure your compliance with the FCC regulations.

When used with a compatible interface that uses RTS/CTS serial port transceiver control, once the software starts sending your identification, the process won't be interrupted by you un-keying your transceiver. See the FAQ for specific issues with the West Mountain RigBlaster Pro.

If you don't presently have a sound card interface a complete schematic for a basic yet fully functional interface is included here and in the help files. All parts are available at your local Radio Shack store.

All settings are saved from session to session. All sound card settings are restored when quitting the software. Just start the software running and your station is ready to be compliant with the FCC regulations.

Any sound card that is installed in your system may now be selected independently from the windows default sound device.

The Pulser aka "Pulse Tuner" sends a series of short audio tones with a duty cycle as low as 20% to the audio input of your radio enabling you to tune your amplifier or antenna tuner, without worrying about overheating those expensive amplifier tubes or antenna tuner parts.

Take your time, tuning your amplifier optimally using the RoMac Pulser. Considering the cost of replacing amplifier tubes, the RoMac Pulser is a bargain!

Some "Tuning Pulsers" merely key your radio using the CW jack on your radio. RoMac Pulser sends a series of short audio tones (pulses) to you microphone input. The pulses are also "shaped", so the amplitude of the pulse slopes up to peak amplitude.  This further reduces heat and stress on you expensive amplifier tubes and parts.

The RoMac Pulser is compatible with all transmitters, from Icom, Kenwood, TenTec, Yaesu, Collins, Drake and others. Will work with any amplifier on the market today or any older amplifier.

The speed and duty cycle of the audio tones are both adjustable.  All settings are saved from session to session.

RoMac CW Identifier & Tuning Pulser 2.4.4 Features:

· Adjustable CW speed 5 to 40 wpm
· ID time interval 1 to 30 minutes
· Tone frequency adjustable 500 to 1000 Hz
· Three different options when to send the CW Identification, including a manual send.
· Built in controls for the sound card.
· Selection of sound card independent of preferred sound devices.
· Saves and remembers all settings including all sound card settings.
· Restores all sound card settings after use.
· Simple to interface to your present transceiver.
· Compatible with most commercially manufactured rig interfaces. See FAQ for setup with the RigBlaster Pro.
· Build your own interface with easily obtainable parts.
· Support for Com ports 1 to 8.
· Complete help files included.
· Requires 16 bit SoundBlaster compatible sound card

RoMac CW Identifier & Tuning Pulser 2.4.4 Limitations:

· 20 hours evaluation
· Nag Screen

RoMac CW Identifier & Tuning Pulser security information

You cannot download any crack or serial number for RoMac CW Identifier & Tuning Pulser on this page. Every software that you are able to download on our site is legal. There is no crack, serial number, hack or activation key for RoMac CW Identifier & Tuning Pulser present here. Our collection also doesn't contain any keygens, because keygen programs are being used in illegal ways which we do not support. All software that you can find here is freely downloadable and legal.

RoMac CW Identifier & Tuning Pulser installation package is prepared to be downloaded from our fast download servers. It is checked for possible viruses and is proven to be 100% clean and safe. Various leading antiviruses have been used to test RoMac CW Identifier & Tuning Pulser, if it contains any viruses. No infections have been found and downloading RoMac CW Identifier & Tuning Pulser is completelly problem free because of that reason. Our experts on malware detection tested RoMac CW Identifier & Tuning Pulser with various spyware and malware detection programs, including custom malware and spyware detection, and absolutelly no malware or spyware was found in RoMac CW Identifier & Tuning Pulser.

All software that you can find on our servers, including RoMac CW Identifier & Tuning Pulser, is either freeware, shareware or open-source, some of the software packages are demo, trial or patch versions and if possible (public domain licence), we also host official full versions of software.

Because we want to be one of the fastest download sites on the web, we host all the software including RoMac CW Identifier & Tuning Pulser on our servers. You cannot find here any torrents or download links that would lead you to dangerous sites. does support free software, however we do not support warez or illegal downloads. Warez is harming producers of the software.


Rate RoMac CW Identifier & Tuning Pulser 2.4.4!

Rating: 1.6/5 (14 votes cast)

Similar Programs License Size Rating  
Guitar Tuning Tester Shareware 136 KB 2 / 5
BERENTZEN Bollerwagen-Tuning Freeware 480 KB 2 / 5
Universal Tuning Fork Freeware 123 KB 2 / 5
Guitar Tuning Fork Freeware 82 KB 2 / 5
1Z0-024 - Performance Tuning Practice Test Questions Demo 1.2 MB 3 / 5

Featured Products

LimeWire 5.2.1 Beta / 5.1.3


Share computer files with anyone on the internet!

Kaspersky Anti-Virus Personal 2010

Kaspersky Anti-Virus Personal

BKaspersky AV provides all types of anti-virus protection

Winamp 5 Full


A flexible and sophisticated application for playing and managing your music

DAEMON Tools Lite 4.30.4

Daemon Tools

Advanced application for multiprotection emulation

CMS Templates Download

Blogger Themes

Check our website devoted to CMS themes download - We have everything! If not - please do contact us here.