Surround Matrix Encoder 1401 Description:

Obviously you can't wedge four channels into two without loss, so something has to give. You will probably notice significant cross-talk between the channels, but the decoder should do cross-talk correction, which will help a lot. A side effect of this is that it will make left-right panning unusual, the sources will dwell near the left and right speakers and zip across the centre channel. Because of this it is only really possible to master surround recordings via a pre-logic decoder. Do not attempt to use a conventional 5 point surround multichannel setup, it behaves very differently.In addition to this, output from this process is not entirly mono compatible, in mono output the L, C and R will be preserved as per a stereo recording (centre will be mixed equally), but the surround channel will be totally lost.Careful gain control on the output is required, as the level of the output will be greater than the L and R inputs, but different to the sum amplitude of the input signals.Widely panned reverb fed to the L and R channels will often leak into the S channel, if this is not desired (often it is) reduce the width of the stereo image.The encoding will survive some processes (eg. copying to CD, MD etc.), but may not survive conversion to MP3 or recoding to tape with azimuth errors.

Legalese
This is a four channel matrix encoder, it happens to be compatible with Dolby Surround Pro-Logic.This implementation does not convey a license nor imply a right under any patent, or any other industrial or intellectual property right of Dolby Laboratories.

L
Left channel input. Can be treated as per normal stereo recoding, except that the speaker should be at -22.5°, rather than the normal stereo -30°.

R
Right channel input. As per left channel.

C
Center channel input. Will be directly in front of the listener, stereo and mono compatible.

S
Surround channel. Should sound from the rear speakers, may also leak into the left and right. Has slight delay and bandwidth reduction (cut below 100 Hz, and above 7 KHz) for leakage and noise reduction and enhanced psychoacoustic effects.Not mono compatible.

Surround Matrix Encoder 1401 Requirements:

· Audacity

Surround Matrix Encoder security information

You cannot download any crack or serial number for Surround Matrix Encoder on this page. Every software that you are able to download on our site is legal. There is no crack, serial number, hack or activation key for Surround Matrix Encoder present here. Our collection also doesn't contain any keygens, because keygen programs are being used in illegal ways which we do not support. All software that you can find here is freely downloadable and legal.

Surround Matrix Encoder installation package is prepared to be downloaded from our fast download servers. It is checked for possible viruses and is proven to be 100% clean and safe. Various leading antiviruses have been used to test Surround Matrix Encoder, if it contains any viruses. No infections have been found and downloading Surround Matrix Encoder is completelly problem free because of that reason. Our experts on malware detection tested Surround Matrix Encoder with various spyware and malware detection programs, including fyxm.net custom malware and spyware detection, and absolutelly no malware or spyware was found in Surround Matrix Encoder.

All software that you can find on our servers, including Surround Matrix Encoder, is either freeware, shareware or open-source, some of the software packages are demo, trial or patch versions and if possible (public domain licence), we also host official full versions of software.

Because we want to be one of the fastest download sites on the web, we host all the software including Surround Matrix Encoder on our servers. You cannot find here any torrents or download links that would lead you to dangerous sites.

Fyxm.net does support free software, however we do not support warez or illegal downloads. Warez is harming producers of the software.

Enjoy!