Tranzcode 0.40 Beta Description:

A windows command line utility used to transcode multichannel wav files into mono wavs by outputting the number of wavs depending on the number of channels read from the wav header. Will also decode/transcode .dts files (48kHz) and DTSWav (44.1kHz) directly into mono wavs depending on the
number of channels found.

DTS decoding was made available using libdts from dtsdec source code written by Gildas Bazin with some help from Sam Hocevar which was based on a52dec code with original credits going to Aaron Holtzman and Michel Lespinasse.

Modifications were made to output
mono wavs directly, including LFE output. Currently there is no AC-3 support, but plans for it in the future.

Multichannel Transcoding:
---------------------------------

Mono wav output
will be PCM (non extensible), and have the same bit resolution and sample rate as the multichannel source
wav. Supports very large wavs files (> 4GB), including wav extensible format. Supports 2-ch (stereo), up
to 18 channels. If a mono wav is transcoded, the result will be an "empty" or blank wav with the same
characteristics as the source wav.

Suffix naming convention: Is the same as the output order (as displayed during transcoding):

2 channels:

-L (Left)
-R (Right)

3 channels:

-L (Left)
-R (Right)
-C (Center)

4 channels:

-FL (Front Left)
-FR (Front Right)
-BL (Back Left)
-BR (Back Right)

5 channels:

-FL (Front Left)
-FR (Front Right)
-C (Front Center)
-SL (Surround "Back" Left)
-SR (Surround "Back" Right)

6 channels:

-FL (Front Left)
-FR (Front Right)
-C (Front Center)
-LFE (Low Frequency Effect)
-SL (Surround "Back" Left)
-SR (Surround "Back" Right)

7 channels:

-FL (Front Left)
-FR (Front Right)
-FC (Front Center)
-LFE (Low Frequency Effect)
-BL (Back Left)
-BR (Back Right)
-FLC (Front Left Center)
...

DTS Transcoding:
-----------------------

Transcoded .dts (48kHz) and DTSWav (44.1kHz) files into 32 bit float mono wavs regardless of the bit
resolution they were originally encoded with. The number of output mono wavs depends on the number
of channels read. There is also a downmix option (/S) to output a 16 bit stereo wav. It does not support DTS ES

The output order (is the same as displayed during transcoding):

Usually as 6 or 5 channels, having the suffix name appended as follows:
(note: SL & SR were used instead of BL (Back Left) & BR because I got accustomed to the naming convention)

6 channels:

-FL (Front Left)
-FR (Front Right)
-C (Front Center)
-LFE (Low Frequency Effect)
-SL (Surround "Back" Left)
-SR (Surround "Back" Right)

5 channels:

-FL (Front Left)
-FR (Front Right)
-C (Front Center)
-SL (Surround "Back" Left)
-SR (Surround "Back" Right)
...


Some examples of its usage:

1) Transcodes to (6) 32 bit float mono wavs using "temp-" as the output prefix name:

tranzcode "Us and Them.dts" temp
outputs: temp-FL, temp-FR, temp-C, temp-LFE, temp-SL, temp-SR

2) Transcodes to (6) 32 bit float mono wavs using "-" as the output prefix name:
tranzcode "Us and Them.dts"
outputs: Us and Them-FL, Us and Them-FR, Us and Them-C, Us and Them-LFE, Us and Them-SL, Us and Them-SR

3) Transcode to (2) 32 bit mono wavs (selected channels only/cancels the others):
tranzcode Us_and_Them.wav /+C,LFE
outputs: Us_and_Them-C, Us and Us_and_Them-LFE

4) Transcode to (4) 32 bit mono wavs (selected channels are cancelled):
tranzcode Us_and_Them.wav test /-C,LFE
outputs: test-FL, test-FR, test-SL, test-SR

5) Downmix to a 16 bit stereo wav without gain adjust:
tranzcode "Us and Them.dts" /S
outputs: Us and Them-(stereo).wav

6) Downmix to a 16 bit stereo wav with 15% (lower) gain adjustment (x .15):
tranzcode Us_and_Them.wav" "downmix test" /S@15%
outputs: downmix test-(stereo).wav

Related searches:

windows - ssc service utility - messenger beta - wav - gsm sim utility - windows cleanup - windows commander - windows defender - windows loader - ftp utility - hotkey utility - makemkv beta - windows 7 upgrade advisor - bitdefender total security 2012 beta - dvr utility

Tranzcode security information

You cannot download any crack or serial number for Tranzcode on this page. Every software that you are able to download on our site is legal. There is no crack, serial number, hack or activation key for Tranzcode present here. Our collection also doesn't contain any keygens, because keygen programs are being used in illegal ways which we do not support. All software that you can find here is freely downloadable and legal.

Tranzcode installation package is prepared to be downloaded from our fast download servers. It is checked for possible viruses and is proven to be 100% clean and safe. Various leading antiviruses have been used to test Tranzcode, if it contains any viruses. No infections have been found and downloading Tranzcode is completelly problem free because of that reason. Our experts on malware detection tested Tranzcode with various spyware and malware detection programs, including fyxm.net custom malware and spyware detection, and absolutelly no malware or spyware was found in Tranzcode.

All software that you can find on our servers, including Tranzcode, is either freeware, shareware or open-source, some of the software packages are demo, trial or patch versions and if possible (public domain licence), we also host official full versions of software.

Because we want to be one of the fastest download sites on the web, we host all the software including Tranzcode on our servers. You cannot find here any torrents or download links that would lead you to dangerous sites.

Fyxm.net does support free software, however we do not support warez or illegal downloads. Warez is harming producers of the software.

Enjoy!